Clipper Parts

Oster Classic 76 replacement carbon brush and spring. Assembly consists of two rectangular carbon brushes with small plastic caps on them, and two tiny silver springs. Both brushes should be replaced at the same time. Fits Oster Turbo 111 Clippers

Steel Hinge assembly fits: Oster Classic 76, Model 10 clippers. Holds the blade onto the clipper. Spring loaded so as to snap shut. Fastens on with 2 screws which are NOT Included.

Plastic Lever assembly. Fits Oster Model 76, Turbo 111, and Model 10 Clippers

Oster 76 Cord is a Replacement 2-wire cord for a Oster 76 clipper. 8', also fits Model 10 Clipper. High quality components.

2-wire attachment cord for Andis Improved Master Clipper. Fits Andis Master models: ML Improved Master, ML 01750 Phat Master, and ML 01690 Fade Master. Must be hard wired in to clipper ML-CSA/GC-UL/CSA listed. Replacement 2-Wire Cord for Andis Master Clipper (ML) The package dimension of the product is 7"L x 4.1"W x 1.6"H Country of origin is China

Two Prong, 2 wire cord fit fits models GTO T-Outliner and GO Outliner II Trimmers 2-wire cord must be hard wired into trimmer

Wahl Cord New Two wire cord (white wire is longer than black wire), fits newer model Balding, Designer, SuperTaper, MagicClip, Senior, Sterling Reflections, 5 Star Senior clippers. Users are suggested to open the housing to compare wire length. If the white wire is longer than the black wire, you will require this cord. If they are the same length, you will require the WAP014 Wahl Cord Old.

Fits all compatible Andis clippers BG series. It is the clear plastic frame with a black lever that moves the blade back and forth. It should be replaced when blades are no longer cutting sharply. Measures 3-1/2-inch length by 2-1/2-inch width by 1/2-inch height.

Switch Assembly for Oster Model 76 Clipper

Hinge Assembly for BG series clippers. Takes Oster 76 blades.

Wahl Switch - Black is a Replacement power switch for Wahl 5 Star Senior Clipper (No. WA1000)

Oster clipper fiber drive gear, 21 teeth. Fits Classic 76 and single speed A5 clippers.

Two Wire cord (same length), fits older model Balding , Designer , SuperTaper , Magic Clip , Senior , Sterling Reflections , 5 Star Senior clippers. Users are suggested to open the housing to compare wire length. If same length, you will require this cord. If the white wire is longer, you will require the WAP005 Wahl Cord New.

The Andis #26049 is a 2-wire detachable cord, which fits model SLII Styliner II Trimmer. This cord also fits model Old Excel Trimmer

Oster Blade Socket for Classic 76 Clipper.

MD Barber Carbon Brushes are compatible with Oster 76 Clippers. They are an exact copy of the standard Oster Brushes but at a much reduced price. They are made with high-quality materials and construction, and they are designed to last. Carbon brushes are an important part of the motor in your Oster 76 Clippers. They help to conduct electrical current between the stationary and rotating parts of the motor. Over time, carbon brushes can wear out and need to be replaced. If you notice that your clippers are not running as smoothly as they used to, or if they are starting to overheat, it may be time to replace the carbon brushes. Replacing the carbon brushes in your Oster 76 Clippers is a relatively easy task. You can find instructions on how to do this on the Oster website. When choosing replacement carbon brushes, it is important to make sure that you are getting the correct type for your clippers. MD Barber Carbon Brushes are a good option for Oster 76 Clippers because they are high-quality and compatible. Here are some tips for replacing the carbon brushes in your Oster 76 Clippers: Make sure that the clippers are unplugged and turned off. Remove the screws that hold the top cover of the clippers in place. Carefully lift off the top cover. Locate the carbon brushes. They are two small brushes that are located near the motor. Use a pair of pliers to remove the old carbon brushes. Install the new carbon brushes. Replace the top cover and screw it back into place. Plug in the clippers and turn them on. If you are having any trouble replacing the carbon brushes in your Oster 76 Clippers, you can take advantage of our repair services !

Restores power to your clipper: If your clipper won't turn on, a new switch could be the fix.

Replacement charger for Andis Supra Zr & Supra ZR II Clippers.

Fits the Wahl Cordless Designer Clipper, Cordless Magic Clip Clipper, and the Finale Shaver. Model 97225 is a 4V cord made for older models. The part that goes into the clipper port for charging is black in color. Model 97624 is a 5V with grey colored end.

Wahl Side Lever - Black adjusts, taper and texture for Wahl 5 Star Senior Clipper (No. WA1000)

Premium weighted stand fits all Wahl, Sterling, and 5-Star Cord/Cordless clippers. Charge stand is compatible with both 4 volt and 5 volt power cords. Space saving recharge stand has cord rotation feature. Premium weighted stand fits all Wahl, Sterling, and 5-Star Cord/Cordless Clippers Cordless Clipper Charge Stand is compatible with both 4 volt and 5 volt power cords Space saving recharge stand has cord rotation feature

Oster T-Finisher Cord fits the Oster T-finisher Trimmer

The Andis Cordless T-Outliner Blade Drive/Bracket can be used with any Andis T-Outliner blade to fit the Cordless T-Outliner Trimmer.

Wahl 5 Star Detailer Cord fits the Wahl 5 Star Detailer Trimmer