Clipper Parts

Oster Classic 76 replacement carbon brush and spring. Assembly consists of two rectangular carbon brushes with small plastic caps on them, and two tiny silver springs. Both brushes should be replaced at the same time. Fits Oster Turbo 111 Clippers

Steel Hinge assembly fits: Oster Classic 76, Model 10 clippers. Holds the blade onto the clipper. Spring loaded so as to snap shut. Fastens on with 2 screws which are NOT Included.

Plastic Lever assembly. Fits Oster Model 76, Turbo 111, and Model 10 Clippers

Oster 76 Cord is a Replacement 2-wire cord for a Oster 76 clipper. 8', also fits Model 10 Clipper. High quality components.

2-wire attachment cord for Andis Improved Master Clipper. Fits Andis Master models: ML Improved Master, ML 01750 Phat Master, and ML 01690 Fade Master. Must be hard wired in to clipper ML-CSA/GC-UL/CSA listed. Replacement 2-Wire Cord for Andis Master Clipper (ML) The package dimension of the product is 7"L x 4.1"W x 1.6"H Country of origin is China

Two Prong, 2 wire cord fit fits models GTO T-Outliner and GO Outliner II Trimmers 2-wire cord must be hard wired into trimmer

Wahl Cord New Two wire cord (white wire is longer than black wire), fits newer model Balding, Designer, SuperTaper, MagicClip, Senior, Sterling Reflections, 5 Star Senior clippers. Users are suggested to open the housing to compare wire length. If the white wire is longer than the black wire, you will require this cord. If they are the same length, you will require the WAP014 Wahl Cord Old.

Fits all compatible Andis clippers BG series. It is the clear plastic frame with a black lever that moves the blade back and forth. It should be replaced when blades are no longer cutting sharply. Measures 3-1/2-inch length by 2-1/2-inch width by 1/2-inch height.

Switch Assembly for Oster Model 76 Clipper

Hinge Assembly for BG series clippers. Takes Oster 76 blades.

Wahl Switch - Black is a Replacement power switch for Wahl 5 Star Senior Clipper (No. WA1000)

Oster clipper fiber drive gear, 21 teeth. Fits Classic 76 and single speed A5 clippers.

Two Wire cord (same length), fits older model Balding , Designer , SuperTaper , Magic Clip , Senior , Sterling Reflections , 5 Star Senior clippers. Users are suggested to open the housing to compare wire length. If same length, you will require this cord. If the white wire is longer, you will require the WAP005 Wahl Cord New.

The Andis #26049 is a 2-wire detachable cord, which fits model SLII Styliner II Trimmer. This cord also fits model Old Excel Trimmer

Oster Blade Socket for Classic 76 Clipper.

MD Barber Carbon Brushes are compatible with Oster 76 Clippers. They are an exact copy of the standard Oster Brushes but at a much reduced price. They are made with high-quality materials and construction, and they are designed to last. Carbon brushes are an important part of the motor in your Oster 76 Clippers. They help to conduct electrical current between the stationary and rotating parts of the motor. Over time, carbon brushes can wear out and need to be replaced. If you notice that your clippers are not running as smoothly as they used to, or if they are starting to overheat, it may be time to replace the carbon brushes. Replacing the carbon brushes in your Oster 76 Clippers is a relatively easy task. You can find instructions on how to do this on the Oster website. When choosing replacement carbon brushes, it is important to make sure that you are getting the correct type for your clippers. MD Barber Carbon Brushes are a good option for Oster 76 Clippers because they are high-quality and compatible. Here are some tips for replacing the carbon brushes in your Oster 76 Clippers: Make sure that the clippers are unplugged and turned off. Remove the screws that hold the top cover of the clippers in place. Carefully lift off the top cover. Locate the carbon brushes. They are two small brushes that are located near the motor. Use a pair of pliers to remove the old carbon brushes. Install the new carbon brushes. Replace the top cover and screw it back into place. Plug in the clippers and turn them on. If you are having any trouble replacing the carbon brushes in your Oster 76 Clippers, you can take advantage of our repair services !

Restores power to your clipper: If your clipper won't turn on, a new switch could be the fix.

Replacement charger for Andis Supra Zr & Supra ZR II Clippers.

Fits the Wahl Cordless Designer Clipper, Cordless Magic Clip Clipper, and the Finale Shaver. Model 97225 is a 4V cord made for older models. The part that goes into the clipper port for charging is black in color. Model 97624 is a 5V with grey colored end.

Wahl Side Lever - Black adjusts, taper and texture for Wahl 5 Star Senior Clipper (No. WA1000)

Premium weighted stand fits all Wahl, Sterling, and 5-Star Cord/Cordless clippers. Charge stand is compatible with both 4 volt and 5 volt power cords. Space saving recharge stand has cord rotation feature. Premium weighted stand fits all Wahl, Sterling, and 5-Star Cord/Cordless Clippers Cordless Clipper Charge Stand is compatible with both 4 volt and 5 volt power cords Space saving recharge stand has cord rotation feature

Oster T-Finisher Cord fits the Oster T-finisher Trimmer

The Andis Cordless T-Outliner Blade Drive/Bracket can be used with any Andis T-Outliner blade to fit the Cordless T-Outliner Trimmer.

Wahl 5 Star Detailer Cord fits the Wahl 5 Star Detailer Trimmer

Side lever adjusts taper and texture for Wahl Senior Clipper (No. WA1031)

Andis BG+ Cord Pack is Best for: maintaining your Andis clippers. 120V | 60Hz Convert your cordless clipper to corded for endless hours of use. For use with BGRC and BGR+ clipper. 8' cord.

Oster Link for Classic 76

Andis Master Pin for the side lever

Andis ML Master Blade Pad and Guide Assembly

The replacement screw for the Andis Master and Fade Master Clippers.

Oster clipper fiber drive gear, 21 teeth. Fits Oster Model 10 clipper.

Replacement Cord for the Oster Fast Feed

Wahl Cordless Clipper Replacement Battery fits the Cordless Designer, Cordless Magic Clip, and Sterling 4 clippers. PLEASE NOTE: Packaging color may vary - wrapped in either orange or red.

MD® Replacement Cord Fits Andis Improved & FadeMaster Clippers.

Switch for Oster T-Finisher Trimmer. Switch ONLY.

Andis Replacement charging cord adapter is made of a stronger shell that will not bend or break easily. It complies with CE, FCC, and RoHS standards and has surge protection, over-current, over-voltage, short-circuit, and temperature protection features. Replacement shaver charging cord for Andis ProFoil lithium and ProFoil lithium plus titanium foil shavers (TS-1 & TS-2). You can easily and rapidly charge your gadget by putting it into a power outlet or socket with the supplied cord. Extra-long power cables for Andis shavers and the Input: 110V-240V 50Hz-60Hz / 5V charger AC DC adapter power cord / Output: 5V 1A. HIGH-QUALITY ADAPTER: This adapter is durable with a stronger shell, won't bend or break easily, is CE-approved, and features overheat and over-voltage protection. After extensive use, it won't be hot. STANDARDS: Extra-long Power cords for Andis shavers & the Input: 110V-240V 50Hz–60Hz / 5V Charger AC DC Adapter Power Cord / Output: 5V 1A. EQUIPPED WITH: Replacement shaver charger cord for Andis ProFoil Lithium and ProFoil Lithium Plus Titanium Foil Shavers (TS-1 & TS-2). PROTECTION ELEMENTS: This replacement charger complies with CE, FCC, and RoHS regulations and is equipped with surge protection, over-current, over-voltage, short-circuit protection, and temperature protection features. SIMPLE USE: Using the shaving cord, you can easily and quickly charge your device by plugging it into a power outlet or socket.

Andis ML Master Adjusting Side Lever, steel

Replacement Cord Adapter for the Cordless Envy Li. Andis Part Number: 73105

The Andis Supra ZR II Replacement Battery is a Lithium Ion Battery. Only fits the Supra ZR II Clipper.

Switch assembly for Excel 2 Speed Trimmers

The MD® Replacement Cord fits the Oster 76/10 clippers.

Keep Your Trimmers Running Smoothly with MD® Replacement Cord This high-quality replacement cord is designed to be a perfect fit for your Andis Outliner or T-Outliner trimmers. Features: Reliable and Durable: Constructed with durable materials to withstand the demands of frequent use. Easy to Install: Quick and simple to replace your old or damaged cord. Restores Functionality: Get your trimmers back in action quickly and efficiently. Compatible with: Andis Outliner and T-Outliner trimmers

Cam follower for Cordless Wahl Clippers. Fits: Wahl Cordless Magic Clip #8148 Wahl Cordless Designer #8591 Wahl Cordless Senior #8504-400 Wahl Cordless Legend #8594

2 prong, 2 wire cord fit fits models AEE T-Edjer Trimmers 2-wire cord must be hard wired into trimmer

Andis Cordless Master ML Battery Fits Model MLC Models, 12470

Replacement Cord for the GTX T-Outliner Trimmer. Andis Part Number: 04617.

These are the blade screws for the Andis Outliner and T-Outliner. Fits Andis Outliner II, T-Outliner, Edger, T-Edger, Styliner II, and Styliner M3. Included is 1 pair of screws.

Switch Cap for Oster Model 76 Clipper