Lather Machine Parts

Fits the Wahl Hot Lather Machine.

The replacement liquid bottle holds the Wahl liquid lather inside of the Wahl Hot Lather Machine. Pump Sold Separately.

This Valve Cleaning Brush is to help clear out any build up that lather soap may have created with usage. The wire is designed specifically for use with Campbell's MFS Latherking®.

The Power Switch (P-5005) on the MFS Latherking®. This part was created exclusively for Campbell's MFS Latherking®.

The Valve Assembly (P-5202) attaches to the Manifold/Heating Element Assembly and the Latherking®'s Upper Housing. This part is designed specifically for Campbell's MFS Latherking®.

This Activation Lever (P-5002) stays lowered before foam starts to dispense. Remove two screws; Install new lever between lever arm attachment points, then re-install. This product is designed specifically for Campbell's MFS Latherking®.

The Lever Arm Assembly (P-5303) is attachable to the Upper Housing unit with the Pivot Cap and two Screws, as well as the Motor Switch (P-5201) that mounts to side, the Lifter Assembly that attaches to the middle, and the Activations Lever that connects to the front. This item operates exclusively with Campbell's MFS Latherking®.

The replacement Top Cup Gasket for the PCS Latherking machine.

This Rubber Foot (P-5006) is made specifically to fit the holes on the bottom of the Lower Housing. This is a part exclusively designed for use with Campbell's MFS Latherking®.

The replacement Bottom Cup Gasket for the PCS Latherking machine.

The Reservoir Nut (P-5100) is replaceable and removable. This item is crafted specifically for Campbell's MFS Latherking®.

This Motor Switch (P-5201) mounts to the side of the Lever Arm Assembly using the Screw. Specifications of this product include: SS-5GLT 54250V 5A125VAC / 3A250VAC This product is designed specifically for Campbell's MFS Latherking®.

The replacement Switch Gasket for the PCS Latherking machine.

The replacement Soap Cup Lid Only for the PCS Latherking machine.

The Reservoir Washer (P-5101) found in this device is removable and replaceable. This item is crafted specifically for Campbell's MFS Latherking®.

The replacement Soap Cup for the PCS Latherking machine.

The Lifter Assembly (P-5300) mounts to the Lever Assembly and the Valve Assembly and includes fasteners and collars. This part is designed specifically for Campbell's MFS Latherking®.

The replacement upper housing for model PCS Latherking.

The replacement Push Button for the PCS Latherking machine.

Only fit Campbell's Latherking Model PCS. Rubber feet for bottom of the Latherking. 1 per order

The Valve Spring (P-5203) slides perfectly over the Valve Assembly. This Valve Spring is compatible exclusively with Campbell's MFS Latherking®.

The Manifold / Heating Element Assembly (P-5301) installs with the Upper Housing and is composed of a Heating Element, Matched Resistor, and wiring connectors. This part is specifically manufactured for Campbell's MFS Latherking®.

The Valve Assembly attaches to the Manifold/Heating Element Assembly. This part is designed specifically for Campbell's PCS Latherking®.

The screw used in the Activation Lever (P-5103). This screw is specifically designed for Campbell's MFS Latherking®.

The replacement Auger for the PCS Latherking machine.

The replacement valve metal washer for the PCS Latherking machine.

The Scalpmaster Replacement DC Motor Assembly for Scalpmaster Lather Machine is a genuine replacement part for the DC motor in the Scalpmaster Lather Machine. The DC motor is responsible for powering the pump that creates the lather in the Scalpmaster Lather Machine. If the motor fails, the machine will not be able to produce lather. Replacing the DC motor is a relatively simple process, and most people can do it at home with the help of a few basic tools. To replace the DC motor, you will need to: Unplug the Scalpmaster Lather Machine from the electrical outlet. Remove the top cover of the machine. Locate the DC motor assembly. It is usually located on the bottom of the machine. Remove the screws that secure the DC motor assembly to the machine. Disconnect the electrical wires from the DC motor assembly. Install the new DC motor assembly in the reverse order of removal. Secure the DC motor assembly with the screws. Replace the top cover of the machine. Plug the Scalpmaster Lather Machine back into the electrical outlet. Once you have replaced the DC motor, the Scalpmaster Lather Machine should be ready to use again. Here are some tips for replacing the DC motor: Be careful not to damage the electrical wires when you are disconnecting them from the old motor. Make sure that the new motor is properly aligned with the mounting holes in the machine. Tighten the screws that secure the motor assembly securely. Test the Scalpmaster Lather Machine to make sure that it is working properly before using it on a customer. If you are not comfortable replacing the micro switch yourself, you can take advantage of our repair services .

The Screw (P-5102) used for the Lever Arm Assembly , the Lower Housing and the Manifold/Heating Assembly. A screw designed for exclusive use with Campbell's MFS Latherking®.

This Pivot Cap (P-5200) is used to hand the Lever Arm Assembly with the Upper Housing, used with the screw. This Pivot Cap is exclusive with Campbell's MFS Latherking®.

The replacement Housing Screw for the PCS Latherking machine. 1 per order

The Upper Housing (P-5001) unit for the MFS Latherking®. This piece is designed specifically for Campbell's MFS Latherking®.

This Screw (P-5104) is most compatible with the Motor Switch, Pivot Cap, Lever Arm Assembly, and the Lifter Assembly. This product is exclusive for use with Campbell's MFS Latherking®.

The Crimp Nut is manufactured specifically for use with wire and connection pigtails. This part was designed specifically for use with Campbell's MFS Latherking®.

This Cover / Lid (P-5000) is ergonomically designed to suppress noise with a foam strip on the inner flange. This product is crafted and fitted for Campbell's MFS Latherking®.

The Cord Assembly (P-5004) for Campbell's MFS Latherking®.

The replacement Wire Nut Grey for model PCS Latherking. 1 per order