Lather Machine Parts

The replacement Auger for the PCS Latherking machine.

The replacement valve metal washer for the PCS Latherking machine.

The Scalpmaster Replacement DC Motor Assembly for Scalpmaster Lather Machine is a genuine replacement part for the DC motor in the Scalpmaster Lather Machine. The DC motor is responsible for powering the pump that creates the lather in the Scalpmaster Lather Machine. If the motor fails, the machine will not be able to produce lather. Replacing the DC motor is a relatively simple process, and most people can do it at home with the help of a few basic tools. To replace the DC motor, you will need to: Unplug the Scalpmaster Lather Machine from the electrical outlet. Remove the top cover of the machine. Locate the DC motor assembly. It is usually located on the bottom of the machine. Remove the screws that secure the DC motor assembly to the machine. Disconnect the electrical wires from the DC motor assembly. Install the new DC motor assembly in the reverse order of removal. Secure the DC motor assembly with the screws. Replace the top cover of the machine. Plug the Scalpmaster Lather Machine back into the electrical outlet. Once you have replaced the DC motor, the Scalpmaster Lather Machine should be ready to use again. Here are some tips for replacing the DC motor: Be careful not to damage the electrical wires when you are disconnecting them from the old motor. Make sure that the new motor is properly aligned with the mounting holes in the machine. Tighten the screws that secure the motor assembly securely. Test the Scalpmaster Lather Machine to make sure that it is working properly before using it on a customer. If you are not comfortable replacing the micro switch yourself, you can take advantage of our repair services .

The Screw (P-5102) used for the Lever Arm Assembly , the Lower Housing and the Manifold/Heating Assembly. A screw designed for exclusive use with Campbell's MFS Latherking®.

This Pivot Cap (P-5200) is used to hand the Lever Arm Assembly with the Upper Housing, used with the screw. This Pivot Cap is exclusive with Campbell's MFS Latherking®.

The replacement Housing Screw for the PCS Latherking machine. 1 per order

The Upper Housing (P-5001) unit for the MFS Latherking®. This piece is designed specifically for Campbell's MFS Latherking®.

This Screw (P-5104) is most compatible with the Motor Switch, Pivot Cap, Lever Arm Assembly, and the Lifter Assembly. This product is exclusive for use with Campbell's MFS Latherking®.

The Crimp Nut is manufactured specifically for use with wire and connection pigtails. This part was designed specifically for use with Campbell's MFS Latherking®.

This Cover / Lid (P-5000) is ergonomically designed to suppress noise with a foam strip on the inner flange. This product is crafted and fitted for Campbell's MFS Latherking®.

The Cord Assembly (P-5004) for Campbell's MFS Latherking®.

The replacement Wire Nut Grey for model PCS Latherking. 1 per order

The replacement Wire Nut Blue for the PCS Latherking machine. 1 per order

The Lower Housing (P-5003) unit for the console. Specifically created for usage with Campbell's MFS Latherking®.

The Screw (P-5105) is compatible with the Lock Washer and can be used with Ground Motor/Feed Screw Assembly. This screw is exclusively designed for Campbell's MFS Latherking®.

Scalpmaster Replacement Bulb for SM9000- Scalpmaster Replacement Cover for Scalpmaster Lather Machine

The replacement Motor Screw for the PCS Latherking machine. 1 per order